Nameplate · order code
Read the plate before you order.
Two units with the same displacement can differ in shaft, regulator, control type and rotation. The order code says which one you have; the plate says which one the machine was built with. Both decide whether the pump bolts on.
How the code is built
K3V / K5V order code = series + displacement + control code (DT / DTP / DTH / S / SH …) + regulator code + rotation (R = clockwise, L = counter-clockwise) + design code
Source: FLUTEK English catalogue 2024-11-25, pages 7-9.
Displacement code
63 | 63 mL/r (K3V) · 65 mL/r listed for K7V |
|---|---|
80 | 80 mL/r (K5V) |
112 | 112 mL/r (K3V) |
125 | 130 mL/r (K7V) |
140 | 140 mL/r (K3V / K5V) |
160 | 160 mL/r (K5V) |
180 | 180 mL/r (K3V) |
200 | 200 mL/r (K5V) |
210 | 210 mL/r (K7V) |
240 | 240 mL/r (K7V) |
280 | 280 mL/r (K3V / K7V) |
Build / type
DT | Tandem type double pump |
|---|---|
S | Single pump (with centrifugal pump) |
P | With PTO |
SH / DTH | Control / configuration variants of the same displacement |
Regulator family
6 | K3V63 |
|---|---|
8 | K5V80 |
G | K3V112 |
S | K5V140 |
H | K3V140 / K3V180 |
K | K5V200 |
D | K3V280 |
Horsepower control
0 | Free power setting control |
|---|---|
1 | Constant power control |
2 | Total power control |
4 | Pressure cut-off control |
5 | Constant power + pressure cut-off |
6 | Total power + pressure cut-off |
9 | Total power + power shift control (power reduction only) |
H | Total power + power shift control (increase and decrease) |
Control type (two-letter code)
9N | Negative flow control + total horsepower control + variable horsepower control |
|---|---|
9C | Negative flow control + total horsepower + two-stage max. flow + variable horsepower |
HN | Negative flow control + total horsepower + variable horsepower |
9T | Electric flow control + total horsepower + variable horsepower + mechanical electro-hydraulic switch valve |
YT | Electric flow control + variable horsepower + automatic electro-hydraulic switch valve |
0E | Electric flow control + free power setting |
Build forms listed in the catalogue
| Series | Displacement | Single | Single + centrifugal | Tandem | Tandem + PTO | Tandem + centrifugal |
|---|---|---|---|---|---|---|
| K3V | 63 / 112 / 140 | yes | no | yes | yes | no (140 yes) |
| K3V | 180 | yes | yes | yes | yes | yes |
| K3V | 280 | no | yes | yes | no | yes |
| K5V | 80 / 140 | yes | no | yes | yes | no |
| K5V | 160 / 200 | yes | yes | yes | yes | yes |
What to photograph
1 · The nameplate
Straight on, all four edges in frame, no glare. The model string and the serial number must both be readable.
2 · The pump, from the side
Regulator side and shaft end. This is what tells us the control type when the plate is worn.
3 · The machine plate
Brand, model and serial of the machine itself — the same unit code is built differently for different machines.
Send the plate, get the variant in writing.
One photo of the nameplate and one of the pump from the side. We confirm the variant, then quote — the price holds for seven days.